Inside or outside fit: which roller blind is right?
It comes down to three things: how dark you want the room, how deep your window recess is, and the look you prefer. Here’s how to decide for each window.
The short version
- Choose inside fit for a neat, built-in look in living areas, if the recess is deep enough and nothing sticks out.
- Choose outside fit when you want it as dark as possible, the recess is shallow, or handles and winders are in the way.
- Bedrooms, nurseries and media rooms usually suit outside fit. Living rooms, kitchens and studies usually suit inside fit.
What each one means
Inside fit
The brackets fix to the top of the window recess and the blind sits within it. You see the architrave around it, and the blind looks part of the window.
Outside fit
The brackets fix to the wall or architrave above the window and the blind hangs in front of the whole opening, overlapping it on each side.
The trade-offs
| Inside fit | Outside fit | |
|---|---|---|
| Light at the edges | A fine line of light down each side, because the blind must be slightly narrower than the opening to roll freely | Much less, because the blind overlaps the frame |
| Look | Neat and built-in; the architrave stays on show | Covers the architrave; can make a window look larger |
| Recess depth needed | Enough flat depth for the rolled blind and brackets | None |
| Handles and winders | Can get in the way | The blind clears them |
| Fixing | Into the top of the recess | Into the wall or architrave, which needs solid fixing points |
Room by room
| Room | Usually best | Why |
|---|---|---|
| Main bedroom | Outside fit | Less light at the edges for sleeping in |
| Nursery or kids’ room | Outside fit | Darkest option for day sleeps; consider motorised to avoid chains |
| Media room | Outside fit | Cuts the edge glare on the screen |
| Living room | Inside fit | Clean look; a little edge light is rarely a problem |
| Kitchen | Inside fit | Keeps the blind clear of benchtops and taps |
| Study | Inside fit | Neat, and edge light doesn’t matter in the day |
The light gap, explained
An inside-fit blind can’t be exactly as wide as the recess. The fabric has to clear the walls to roll up and down, and the brackets and the chain mechanism take up some width. So a thin line of light shows down each side when the blind is lowered. That’s normal for every inside-fit roller blind, not a fault.
If that edge light would bother you, choose an outside fit, or add curtains over the blind for a properly dark room.
When inside fit won’t work
- The recess is too shallow. The rolled-up blind needs somewhere to sit. Most standard roller blinds need around 50 to 80 mm of flat depth, depending on the size and fabric.
- Something sticks out. Window handles, winders or locks can stop the blind sitting flat.
- There’s no recess. Some windows sit flush with the wall.
In any of those cases, outside fit is the answer. Our measuring guide shows how to measure for each.
Common questions
Is inside or outside fit better for blockout?
Outside fit. Overlapping the frame cuts most of the light that gets around the edges of an inside-fit blind.
Why is there a gap at the sides of my inside-fit blind?
The fabric has to be slightly narrower than the recess so it can roll freely, and the brackets and chain mechanism take up some width. A fine line of light down each side is normal for every inside-fit roller blind.
Can I put an inside-fit blind on a window with handles?
Only if there’s enough flat depth in front of the handles. Measure the depth to the front of the handle, not to the glass. If there isn’t enough, choose outside fit.
Does outside fit make a window look bigger?
It can. Mounting the blind above and wider than the frame makes the window read larger, especially if the blind is fixed close to the ceiling.